Stands
Plate Display Stand
An easel-type stand for a display plate: a 110mm-wide base, a 100mm raked back for the plate to lean on and a front lip to catch the foot ring. Takes plates from about 150mm up to dinner-plate size — beyond roughly 280mm the lean gets top-heavy and a wider stand is the honest answer (ask; the design is parametric). Prints flat on its base with the back support rising as a solid wedge, no support needed. PETG for a stand that holds something you care about — it is less brittle than PLA if the stand gets knocked.
from £23.52example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £23.53 | £98.81£19.76/unit | £178.80£17.88/unit | £399.96£16.00/unit |
| PETG | £24.90 | £104.57£20.91/unit | £189.23£18.92/unit | £423.27£16.93/unit |
| ABS / ASA | £28.01 | £117.63£23.53/unit | £212.86£21.29/unit | £476.13£19.05/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.