Boat Display Cradle (small)
A display cradle for a model boat: a 140×76mm base with two transverse arms 45.0mm tall, each carrying a 48mm-wide, 20mm-deep V the hull settles into. The small size suits hulls to roughly 58mm beam — and because the whole thing is parametric, tell us your hull's beam and keel line and we will cut the V to match. The V is an open-topped notch, so however steep its walls they are top surfaces and nothing overhangs; it prints flat with no support. Line the Vs with self-adhesive felt before the boat goes on — bare plastic marks varnish. PLA indoors is fine; PETG if it lives on a sunny windowsill.
from £22.83example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £22.83 | £95.87£19.17/unit | £173.49£17.35/unit | £388.07£15.52/unit |
| PETG | £24.06 | £101.07£20.21/unit | £182.89£18.29/unit | £409.10£16.36/unit |
| ABS / ASA | £26.81 | £112.62£22.52/unit | £203.79£20.38/unit | £455.85£18.23/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.