Boat Display Cradle (large)
A display cradle for a model boat: a 200×110mm base with two transverse arms 65.0mm tall, each carrying a 72mm-wide, 30mm-deep V the hull settles into. The large size suits hulls to roughly 82mm beam — and because the whole thing is parametric, tell us your hull's beam and keel line and we will cut the V to match. The V is an open-topped notch, so however steep its walls they are top surfaces and nothing overhangs; it prints flat with no support. Line the Vs with self-adhesive felt before the boat goes on — bare plastic marks varnish. PLA indoors is fine; PETG if it lives on a sunny windowsill.
from £53.51example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £53.51 | £224.73£44.95/unit | £406.65£40.67/unit | £909.60£36.38/unit |
| PETG | £56.27 | £236.34£47.27/unit | £427.66£42.77/unit | £956.62£38.26/unit |
| ABS / ASA | £62.33 | £261.79£52.36/unit | £473.72£47.37/unit | £1,059.63£42.39/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.