Ruined Wall Section (small)
A 60mm ruined wall standing up to 40mm, 5mm thick on a footing — 5 bays broken off at different heights, for a 28mm/32mm table. The small section is low enough to fight over rather than around. The break profile is a fixed list rather than a random one, which is the point: every copy is identical, so a set butts together into one ruin instead of a row of unrelated offcuts. Vertical faces throughout, so no support. Chunky masonry is what FDM is actually good at — prime it, drybrush it, and the layer lines do half the texturing for you.
from £3.24example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £3.24 | £13.59£2.72/unit | £24.59£2.46/unit | £55£2.20/unit |
| PETG | £3.42 | £14.37£2.87/unit | £26.01£2.60/unit | £58.17£2.33/unit |
| ABS / ASA | £3.85 | £16.15£3.23/unit | £29.22£2.92/unit | £65.37£2.61/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.