Tabletop gaming
Barricade Section
A 90mm plank barricade, 26mm to the top of the posts, with four posts and props raking back to the ground — a line of cover for a 28mm/32mm table, about waist height on a 28mm model. Butt several end to end, or angle them into a corner. Every face is vertical or at 45°, which is the angle FDM manages unsupported, so it prints straight off the bed in one piece with nothing to clean off the back. PLA is fine for terrain that lives in a box.
from £4.56example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £4.56 | £19.14£3.83/unit | £34.63£3.46/unit | £77.46£3.10/unit |
| PETG | £4.82 | £20.25£4.05/unit | £36.65£3.67/unit | £81.97£3.28/unit |
| ABS / ASA | £5.42 | £22.78£4.56/unit | £41.22£4.12/unit | £92.20£3.69/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.