Tabletop gaming
Cargo Crate (small)
A 16mm cargo crate with 3mm corner battens standing 0.8mm proud — scatter terrain for a 28mm/32mm table, roughly a 0.8m box at that scale. It is a 1.6mm shell, open underneath, so it is pennies of plastic rather than a solid brick; the lid bridges 12.8mm across the inside, which is a short enough span to come out clean. Print a stack of them. The battens are vertical, so nothing needs support, and the layer lines pass for sawn timber once it is primed and drybrushed.
from £1.11example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £1.11 | £4.67£0.93/unit | £8.44£0.84/unit | £18.88£0.76/unit |
| PETG | £1.19 | £4.98£1.00/unit | £9.01£0.90/unit | £20.16£0.81/unit |
| ABS / ASA | £1.36 | £5.71£1.14/unit | £10.33£1.03/unit | £23.11£0.92/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.