Movement Tray (25mm, 5×2)
A movement tray for ten 25mm round bases in a 5×2 rank, 132.0×55.2mm overall with a 5mm lip and 0.6mm of clearance per base. Same generator as the 32mm tray with one number changed — tell us your base size and rank and we will cut it to suit. There is a finger slot through the floor so you can push a rank out from underneath instead of prising models off the edge by their ankles. Deliberately no per-base sockets: a plain well takes bases that are slightly out of round, or based up a bit proud, without a fight. Prints as four walls on a floor, no support. PETG if it is going to be picked up by the lip every turn.
from £7.94example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £7.94 | £33.33£6.67/unit | £60.31£6.03/unit | £134.91£5.40/unit |
| PETG | £8.47 | £35.55£7.11/unit | £64.34£6.43/unit | £143.91£5.76/unit |
| ABS / ASA | £9.70 | £40.76£8.15/unit | £73.75£7.38/unit | £164.97£6.60/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.