Ruined Wall Section (medium)
A 100mm ruined wall standing up to 55mm, 6mm thick on a footing — 7 bays broken off at different heights, for a 28mm/32mm table. The medium section is tall enough to block line of sight to a standing model. The break profile is a fixed list rather than a random one, which is the point: every copy is identical, so a set butts together into one ruin instead of a row of unrelated offcuts. Vertical faces throughout, so no support. Chunky masonry is what FDM is actually good at — prime it, drybrush it, and the layer lines do half the texturing for you.
from £7.89example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £7.89 | £33.15£6.63/unit | £59.99£6.00/unit | £134.18£5.37/unit |
| PETG | £8.33 | £34.98£7.00/unit | £63.30£6.33/unit | £141.59£5.66/unit |
| ABS / ASA | £9.30 | £39.07£7.81/unit | £70.70£7.07/unit | £158.16£6.33/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.