Ruined Wall Section (large)
A 150mm ruined wall standing up to 70mm, 8mm thick on a footing — 9 bays broken off at different heights, for a 28mm/32mm table. The large section is tall enough to block line of sight to a standing model. The break profile is a fixed list rather than a random one, which is the point: every copy is identical, so a set butts together into one ruin instead of a row of unrelated offcuts. Vertical faces throughout, so no support. Chunky masonry is what FDM is actually good at — prime it, drybrush it, and the layer lines do half the texturing for you.
from £18.03example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £18.03 | £75.71£15.14/unit | £137£13.70/unit | £306.45£12.26/unit |
| PETG | £18.97 | £79.68£15.94/unit | £144.19£14.42/unit | £322.52£12.90/unit |
| ABS / ASA | £21.05 | £88.42£17.68/unit | £160£16/unit | £357.89£14.32/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.