Movement Tray (32mm, 5×2)
A movement tray for ten 32mm round bases in a 5×2 rank, 167.0×69.2mm overall with a 5mm lip and 0.6mm of clearance per base. Same generator as the 25mm tray with one number changed — tell us your base size and rank and we will cut it to suit. There is a finger slot through the floor so you can push a rank out from underneath instead of prising models off the edge by their ankles. Deliberately no per-base sockets: a plain well takes bases that are slightly out of round, or based up a bit proud, without a fight. Prints as four walls on a floor, no support. PETG if it is going to be picked up by the lip every turn.
from £12.09example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £12.18 | £51.14£10.23/unit | £92.53£9.25/unit | £206.98£8.28/unit |
| PETG | £12.98 | £54.52£10.90/unit | £98.66£9.87/unit | £220.68£8.83/unit |
| ABS / ASA | £14.86 | £62.43£12.49/unit | £112.97£11.30/unit | £252.70£10.11/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.