Lineside Hut (OO)
A permanent-way hut at OO (1:76.2): 35.4×27.6mm over the eaves and 40.2mm to the ridge, from a 2400×1800mm prototype with a 2200mm eaves height. Open underneath — it glues to the baseboard, so a floor would only be plastic you cannot see. The wall is the whole story on this one: 100mm of prototype brick is 1.31mm at OO, which works, but it is 1.15mm at HO and 0.68mm at N, so we do not offer it below OO and would say so before taking the job. Both roof slopes face up, so the roof needs no support; its underside bridges 28.9mm across the interior, which a slicer will handle, though a couple of support lines under the ridge would not hurt.
from £4.15example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £4.15 | £17.45£3.49/unit | £31.57£3.16/unit | £70.61£2.82/unit |
| PETG | £4.41 | £18.54£3.71/unit | £33.54£3.35/unit | £75.03£3.00/unit |
| ABS / ASA | £5.01 | £21.06£4.21/unit | £38.10£3.81/unit | £85.22£3.41/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.