Lineside Hut (O)
A permanent-way hut at O (1:43.5): 62.1×48.3mm over the eaves and 70.8mm to the ridge, from a 2400×1800mm prototype with a 2200mm eaves height. Open underneath — it glues to the baseboard, so a floor would only be plastic you cannot see. The wall is the whole story on this one: 100mm of prototype brick is 2.30mm at O, which works, but it is 1.15mm at HO and 0.68mm at N, so we do not offer it below O and would say so before taking the job. Both roof slopes face up, so the roof needs no support; its underside bridges 50.6mm across the interior, which a slicer will handle, though a couple of support lines under the ridge would not hurt.
from £17.10example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £17.10 | £71.82£14.36/unit | £129.96£13.00/unit | £290.70£11.63/unit |
| PETG | £18.03 | £75.73£15.15/unit | £137.04£13.70/unit | £306.53£12.26/unit |
| ABS / ASA | £20.10 | £84.44£16.89/unit | £152.79£15.28/unit | £341.77£13.67/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.