Push-Fit Lens Cap (67mm thread)
A push-fit cap for a lens with a 67mm filter thread. It does not screw in — it grips the outside of the front ring, which on a 67mm-thread lens typically measures about 69mm (the +2mm rule the slip-on cap makers work to), so the skirt is bored to 69.2mm: 69mm plus 0.2mm of designed clearance, a firm push fit on most printers. If it will ride on a fitted filter rather than the bare lens, the rim is about 1mm bigger again — measure it and we will cut the bore to suit. 8mm skirt, 2mm walls, prints face-down with no support. PETG has the spring for a friction fit; PLA works but loosens with wear.
from £5.78example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £5.78 | £24.26£4.85/unit | £43.90£4.39/unit | £98.21£3.93/unit |
| PETG | £6.15 | £25.85£5.17/unit | £46.77£4.68/unit | £104.63£4.19/unit |
| ABS / ASA | £7.03 | £29.54£5.91/unit | £53.45£5.35/unit | £119.57£4.78/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.