Push-Fit Lens Cap (58mm thread)
A push-fit cap for a lens with a 58mm filter thread. It does not screw in — it grips the outside of the front ring, which on a 58mm-thread lens typically measures about 60mm (the +2mm rule the slip-on cap makers work to), so the skirt is bored to 60.2mm: 60mm plus 0.2mm of designed clearance, a firm push fit on most printers. If it will ride on a fitted filter rather than the bare lens, the rim is about 1mm bigger again — measure it and we will cut the bore to suit. 8mm skirt, 2mm walls, prints face-down with no support. PETG has the spring for a friction fit; PLA works but loosens with wear.
from £4.62example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £4.62 | £19.40£3.88/unit | £35.10£3.51/unit | £78.52£3.14/unit |
| PETG | £4.92 | £20.67£4.13/unit | £37.41£3.74/unit | £83.67£3.35/unit |
| ABS / ASA | £5.63 | £23.63£4.73/unit | £42.77£4.28/unit | £95.66£3.83/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.