Push-Fit Lens Cap (52mm thread)
A push-fit cap for a lens with a 52mm filter thread. It does not screw in — it grips the outside of the front ring, which on a 52mm-thread lens typically measures about 54mm (the +2mm rule the slip-on cap makers work to), so the skirt is bored to 54.2mm: 54mm plus 0.2mm of designed clearance, a firm push fit on most printers. If it will ride on a fitted filter rather than the bare lens, the rim is about 1mm bigger again — measure it and we will cut the bore to suit. 8mm skirt, 2mm walls, prints face-down with no support. PETG has the spring for a friction fit; PLA works but loosens with wear.
from £3.99example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £3.99 | £16.75£3.35/unit | £30.31£3.03/unit | £67.81£2.71/unit |
| PETG | £4.25 | £17.85£3.57/unit | £32.30£3.23/unit | £72.25£2.89/unit |
| ABS / ASA | £4.86 | £20.41£4.08/unit | £36.94£3.69/unit | £82.63£3.31/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.