Tabletop gaming
Dice Tray (low wall)
A 170×170mm rolling tray with 16mm walls — low enough to reach over, high enough that a d20 stays in it. A printed tray is loud; the fix is the same one every dice tray uses: drop a felt or leather sheet in the bottom, which also stops the dice chipping. The walls take the ricochet. Prints as four walls on a floor, no support, and it is mostly air — cheap for its size. PLA is fine.
from £43.91example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £43.91 | £184.40£36.88/unit | £333.68£33.37/unit | £746.40£29.86/unit |
| PETG | £46.47 | £195.16£39.03/unit | £353.15£35.32/unit | £789.93£31.60/unit |
| ABS / ASA | £52.27 | £219.55£43.91/unit | £397.29£39.73/unit | £888.67£35.55/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.