Tabletop gaming
Card Tray (sleeved cards)
An open tray for a face-up stack of sleeved standard cards. Standard trading cards are 63.5×88mm and the sleeves around them are bigger — 66×91mm for common sleeves, up to about 67×92mm for premium ones — so the well is cut at 68×93.5mm: 1mm of clearance over the largest common sleeve, which is enough to lift a stack out without shaving the sleeve edges. The front wall is dropped to 10mm so a thumb gets under the stack. Walls 2.4mm, prints without support. PLA is fine on a games table.
from £14.69example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £14.69 | £61.70£12.34/unit | £111.65£11.17/unit | £249.74£9.99/unit |
| PETG | £15.62 | £65.60£13.12/unit | £118.71£11.87/unit | £265.54£10.62/unit |
| ABS / ASA | £17.77 | £74.63£14.93/unit | £135.05£13.51/unit | £302.08£12.08/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.