3D Printed Cable Management Parts
Cable tidies are the classic case for printing rather than buying: the part is small, you need a lot of them, and the size that fits your cable is never the size in the shop. These example designs cover snap-in clips sized to the cable, flanged grommets to finish a hole drilled through a desk, tie mounts that anchor a loom anywhere, and combs that hold a bundle parallel. They are cheap enough that a batch to route a whole desk or vehicle costs pennies each. PETG holds its spring better than PLA where a clip has to flex open repeatedly.
11 example designs · Free CC0 files to download · Order any of them printed, or send your own
10mm Cable Clip
4mm Cable Clip
6mm Cable Clip
8mm Cable Clip
Cable Comb (10-way)
Cable Comb (6-way)
Cable Tie Mount (large)
Cable Tie Mount (small)
Desk Cable Grommet (large)
Desk Cable Grommet (medium)
Desk Cable Grommet (small)
3D Printed Cable Management Parts — example prices
Worked examples from this category, priced by the same calculator that estimates your own part. Sizes span small to large so you can see how cost moves with the part.
| Example part | Size | PLA | PETG | ABS / ASA |
|---|---|---|---|---|
| 4mm Cable Clip | 8 × 10 × 10 mm | £0.27 – £0.34 | £0.29 – £0.37 | £0.33 – £0.42 |
| 10mm Cable Clip | 14 × 15 × 10 mm | £0.45 – £0.57 | £0.47 – £0.61 | £0.54 – £0.69 |
| Cable Comb (10-way) | 69 × 18 × 3 mm | £1.38 – £1.77 | £1.47 – £1.88 | £1.69 – £2.16 |
| Desk Cable Grommet (large) | 56 × 56 × 18 mm | £5.24 – £6.70 | £5.54 – £7.08 | £6.20 – £7.93 |
Guide prices for a single unit, calculated from the measured geometry of each example model — not fixed quotes. Small parts land at or near the £0 minimum order, and per-unit prices fall with quantity. Your price depends on your own part, its material and its printability. How pricing works.
Want one made to your measurements?
These are example designs. If none of them is quite right, we make them to fit — send a drawing, a photo with measurements, or your own file.
Other categories
- 3D Printed Brackets & Mounts
- 3D Printed Calibration & Test Parts
- 3D Printed Desk & Home Items
- 3D Printed Fasteners & Spacers
- 3D Printed Garden & Outdoor Parts
- 3D Printed Hooks & Holders
- 3D Printed Model Railway Parts
- 3D Printed Stands & Risers
- 3D Printed Storage Bins & Organisers
- 3D Printed Tabletop Gaming Terrain
- 3D Printed Workshop & Tool Parts
Need something that isn't here?
Upload your own file or describe the part — we'll estimate it.