Strap Keepers (20 + 25mm pair)
Two strap keepers — plain rectangular loops that tidy the free tail of a webbing strap back against the run, one for 20mm and one for 25mm webbing on the same plate. The openings are cut 1mm over the strap width and 4.5mm deep, which takes two layers of the usual 1.5–2mm webbing sliding freely; 2.5mm bands all round. The dull little part every belt, harness and satchel loses first, printed in two minutes' worth of plastic. Printed flat, no support. PETG keeps its spring if the keeper has to stretch over a buckle; PLA is fine if it only ever slides.
from £1.63example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £1.63 | £6.83£1.37/unit | £12.36£1.24/unit | £27.65£1.11/unit |
| PETG | £1.73 | £7.28£1.46/unit | £13.17£1.32/unit | £29.46£1.18/unit |
| ABS / ASA | £1.98 | £8.32£1.66/unit | £15.05£1.51/unit | £33.67£1.35/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.