Star Post (30mm tall)
A fluted star post, 1-3/16in (30.2mm) tall with a 4.8mm through hole — the two published numbers for the classic playfield post: 1-3/16in is a standard catalogue height, and the hole clears the #8 stud / 6-32 machine screw these posts mount on (3/16in is the standard clearance for that screw; the retailers do not print the hole size, so treat that one as inferred). The star flutes hold a 5/16in or 3/8in ID rubber ring between points, as on the original. The 13mm across-points diameter is our design, not a published spec — posts vary by maker, so measure yours if it has to match neighbours. A constant cross-section along its height, so it prints flat-out perfectly. PETG takes ball strikes far better than PLA; and printed translucent is not the same as moulded water-clear — expect frosted, not glassy.
from £0.94example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £0.94 | £3.94£0.79/unit | £7.14£0.71/unit | £15.97£0.64/unit |
| PETG | £1 | £4.19£0.84/unit | £7.58£0.76/unit | £16.95£0.68/unit |
| ABS / ASA | £1.13 | £4.75£0.95/unit | £8.59£0.86/unit | £19.21£0.77/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.