Number Plate Spacer Set
Six stand-off spacers for mounting a number plate — Ø18mm with a 5.2mm bore, clearing the No.10 (4.8mm) screws plate fixings normally use, in three heights: 3, 5 and 8mm, two of each on one plate. The job is mundane and real: packing a plate off a curved or ribbed panel so the screws do not bow and crack it, or standing it clear of a bumper lip. Mix heights across the four fixings to take out a curve. Plain vertical tubes, printed standing, no support; a few pence of material. PETG or ASA — this lives outside on the front of a vehicle, and PLA goes soft in summer sun behind glass-adjacent black plastic. Nothing here is a fixing itself: the metal screws still do the holding.
from £2.67example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £2.67 | £11.20£2.24/unit | £20.26£2.03/unit | £45.33£1.81/unit |
| PETG | £2.82 | £11.85£2.37/unit | £21.44£2.14/unit | £47.95£1.92/unit |
| ABS / ASA | £3.17 | £13.31£2.66/unit | £24.08£2.41/unit | £53.86£2.15/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.