Guitar Wall Hanger
A wall hanger for a guitar: a 9mm back plate with two 70mm arms and upturned tips forming a 48mm yoke the neck settles into — sized so any standard neck (about 43mm at the nut) drops in behind the headstock flare, which is what actually carries the instrument. Two things are conditions of use, not suggestions: pad the arms with foam tube or felt before the first guitar goes on, because bare plastic marks nitro lacquer and can react with it; and this carries the NECK of a 3–4kg instrument only. At that load the 14×24mm PETG arms see about 1MPa in bending — the printed part has an enormous margin, and the honest weak point is the wall fixing, so use proper plugs through the two 5mm screw openings and put at least one screw in something solid. Prints the way our hook rails do: plate standing on its edge, arms flat on the bed, tips rising — no support (the screw openings carry 45° peaked tops for the same reason) — and it is used exactly as printed: yoke at the foot of the plate, both screws above it, which is the load path you want, because a hanging guitar tries to lever the top of the plate off the wall and the screws sit exactly there. PETG, not PLA, for anything that hangs over a floor.
from £31.70example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £31.63 | £132.83£26.57/unit | £240.36£24.04/unit | £537.65£21.51/unit |
| PETG | £33.17 | £139.29£27.86/unit | £252.06£25.21/unit | £563.81£22.55/unit |
| ABS / ASA | £36.47 | £153.16£30.63/unit | £277.15£27.71/unit | £619.94£24.80/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.