Dolls house & miniatures
Dining Table, 1:12 (dolls house)
A farmhouse dining table at 1:12 — a 1500×900mm prototype with a 30mm top, 70mm square legs and 100mm apron rails, which comes out 125.0×75.0mm and 62.5mm tall with a 2.5mm top and 5.83mm legs. Everything on it clears the 1.2mm floor a 0.4mm nozzle needs, which is exactly why this design is square-legged: a turned leg would not survive the division by 12. Print it top-down and the legs are vertical posts with nothing overhanging. PLA is fine — it will be painted, and nobody sits on it.
from £15.80example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £15.80 | £66.38£13.28/unit | £120.11£12.01/unit | £268.68£10.75/unit |
| PETG | £16.77 | £70.43£14.09/unit | £127.44£12.74/unit | £285.06£11.40/unit |
| ABS / ASA | £18.98 | £79.70£15.94/unit | £144.22£14.42/unit | £322.60£12.90/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.