Dolls house & miniatures
Bookcase, 1:12 (dolls house)
A five-bay open bookcase at 1:12: 900mm wide, 280mm deep, 1800mm tall in the prototype — 75.0×23.3mm and 150.0mm printed, with four shelves. The 20mm boards come out 1.67mm and the 18mm back panel 1.5mm — thin, but both clear the 1.2mm floor, which is the whole reason this is a 1:12 piece and not a 1:24 one. Print it flat on its back: every board is then a vertical plate and no shelf has to bridge its bay. Shelf bays are 29.3mm tall — right for 1:12 books.
from £22.15example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £22.15 | £93.02£18.60/unit | £168.31£16.83/unit | £376.49£15.06/unit |
| PETG | £23.62 | £99.22£19.84/unit | £179.55£17.96/unit | £401.62£16.06/unit |
| ABS / ASA | £27.08 | £113.74£22.75/unit | £205.82£20.58/unit | £460.39£18.42/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.