Battery Strap Mount
A bed plate for strapping a flight battery (or any battery) down with a hook-and-loop strap: two 26×4mm through-slots take straps up to 25mm wide, and two end feet lift the plate 4mm so the strap passes back underneath and cinches the pack hard against the bed. Two 4mm square openings sit in the middle for countersunk fixings that end up hidden under the battery. 64×33mm overall, 3mm plate. A strap under tension pulls hard on the slot edges, so the plate is PETG, which yields rather than snapping the way PLA does at a loaded slot. Prints upside down (feet rising), no support. Plain honesty about scope: this locates a battery against normal knocks and flight loads; a strap-and-plate is not a crash retention system, on ours or anyone else's.
from £3.11example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £3.11 | £13.04£2.61/unit | £23.60£2.36/unit | £52.79£2.11/unit |
| PETG | £3.30 | £13.88£2.78/unit | £25.11£2.51/unit | £56.18£2.25/unit |
| ABS / ASA | £3.77 | £15.82£3.16/unit | £28.63£2.86/unit | £64.04£2.56/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.