Hooks & holders
J-Hook (small)
A screw-through J-hook with a round 14mm throat, 10mm wide — for hanging anything with a bar or handle (a broom, a coil of cable, a bike) where the flat arm of a plain wall hook would let it swing off. The far arm turns up so the load cannot roll back out. Print it lying on its back and every face is vertical, so it needs no support. PETG for anything with weight on it.
from £1.28example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £1.28 | £5.37£1.07/unit | £9.71£0.97/unit | £21.73£0.87/unit |
| PETG | £1.36 | £5.70£1.14/unit | £10.31£1.03/unit | £23.07£0.92/unit |
| ABS / ASA | £1.54 | £6.46£1.29/unit | £11.69£1.17/unit | £26.14£1.05/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.