Calibration & test
Bridging Test Piece
Three pairs of towers carrying a 2mm deck over 15/30/45mm gaps. The decks are unsupported by design. Print it and look underneath: the span where the strands start to sag is the widest gap worth bridging on that machine before supports are the better answer. Useful before printing anything with a hole or a roof in it.
from £7.33example, in PLA
Example pricing
A guide only — not a fixed quote. Final price depends on material, quantity, print orientation and printability.
| Material | 1 unit | 5 units | 10 units | 25 units |
|---|---|---|---|---|
| PLA | £7.33 | £30.79£6.16/unit | £55.72£5.57/unit | £124.65£4.99/unit |
| PETG | £7.77 | £32.64£6.53/unit | £59.06£5.91/unit | £132.11£5.28/unit |
| ABS / ASA | £8.78 | £36.86£7.37/unit | £66.69£6.67/unit | £149.18£5.97/unit |
Per-unit prices fall with quantity. Larger batches are cheaper still — ask for a bulk quote.